BDDKV - R320-113 *R320-0238 PRIMER COATING ALKYD

  • MSDS: BDDKV
  • Manufacturer: PRATT AND LAMBERT
  • Product Name: R320-113 *R320-0238 PRIMER COATING ALKYD
  • National Stock Number: 8010-00-161-5718
Product Identification

Product ID:R320-113 *R320-0238 PRIMER COATING ALKYD
MSDS Date:01/01/1985
FSC:8010
NIIN:00-161-5718
MSDS Number: BDDKV

Responsible Party
PRATT & LAMBERT
16116 E 13TH ST
WICHITA, KS 67201
US

Cage: PRATT

Contractor
PRATT AND LAMBERT INC
2153 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

Ingredients

ZINC CHROMATE

CAS: 13530-65-9

RTECS: GB3290000

Fraction By Weight: <5%

OSHA PEL 0.1 MG/M3 (CRO3)

ACGIH TLV: 0.01MG/M3(CR)A1;9192


TRIETHYLAMINE

Fraction By Weight: <0.5%

ACGIH TLV: 25PPM


MINERAL SPIRITS

Fraction By Weight: 35%

ACGIH TLV: 500 PPM


LEAD NAPHTHENATE 36%

RTECS: OG1945000

Fraction By Weight: <0.5%


METHYL ETHYL KETOXIME

RTECS: PM7783000

Hazards

Effects of Overexposure:INHAL;ANEST.IRRIT OF
NOSE,THROAT,EYES,DIZZ,NAUS,SPRA MIST CONTNS LEAD.LEAD POISON
CHARACTERIZ (SUPP)

First Aid

First Aid:INHAL:REMOV FR EXPOS,PROVID FRESH AIR.SPLASH EYES,FLUSH IMMED
W/LG AMTS OF WATR 15 MIN.SPLASH SKN:REMOV CONTAM CLOTH & WASH
AFFECT AREA W/WATR.INGEST:DO NOT INDUC VOMITING. CONSULT A
PHYSICIAN IMMED I N ALL CASES.

Fire Fighting

Flash Point:104F TCC 39C
Extinguishing Media:CO*2,DRY CHEM,ALCOHOL FOAM,POLYMR FOAM PREFER F/LG
FIRES.
Fire Fighting Procedures:SELF CONTNED BREATH APPARAT AVAIL F/FIREMEN.
Unusual Fire/Explosion Hazard:KP CONTNRS TIGHT CLOS,ISOLAT FR
HEAT,ELECT EQPMT,SPARKS & OPN FLAM.CLOS CONTNR MAY EXPLOD IF
EXPOS(S

Accidental Release

Spill Release Procedures:REMOV ALL SOURCES OF IGNIT(FLAM,HOT
SURFAC,ELECTR,STATIC OR FRICTIONL SPARKS).VENTILAT AREA & AVD
BREATHING VAP.REMOV W/INERT ABSORBENT & NON-SPARKING TOOLS.STEPS
MUST BE TAKEN TO PREVENT CONTAMINATIO N OF GROUMD WATER OR STREAMS.

Handling

Handling and Storage Precautions:DO NOT STORE ABOV 120 STORE LG
QUANTITIES IN COMPLIANCE W/OSHA 1910.106.CONTNRS SHLD BE GROUNDED &
BONDED TO THE RECEIVING CONTAINER.
Other Precautions:DO NOT CUT OR WELD ON EMPTY.CONTAINER. DO NOT USE
UNTIL ALL SAFETY PRECAUTIONS HAVE BEEN READ AND FULLY UNDERSTOOD BY
THE USER.

Exposure Controls

Respiratory Protection:MECH RESPIRAT TO REMOV OVERSPRAY IN OUTDOOR OR
OPEN AREA.
Ventilation:PRVID GEN DILUT/LOC EXHAUS VENT IN VOL TO KEEP BELOW TLV.
Protective Gloves:SOLVNT IMPERMBL
Eye Protection:SAFETY EYEWEAR AGNST SPLA
Other Protective Equipment:USE PROTECTIVE EQUIPMT TO PREVNT SKIN
CONTACT.
Supplemental Safety and Health
UNUS.FIRE & EXPLOS.HAZ:TO EXTREM HEAT. DO NOT APPLY TO VERY OT
SURFACES.OVEREXPOSURE:BY THE FOLLOWING:HEADACHE, DIZZ,STAGGERING
GAIT,CONFUSION,UNCONSCIOUS, OR COMA.

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:311-373F
Vapor Density:HEAV
Evaporation Rate & Reference:SLOWER THAN ETHER.
Percent Volatiles by Volume:58

Stability

Stability Indicator/Materials to Avoid:YES
AVD CONTCT W/STRONG ACIDS OR ALKALINE MATERIALS.
Stability Condition to Avoid:HEAT,FIRES & HOT SURFAACES.
Hazardous Decomposition Products:BURNING WILL PRODUCE SMOK & OXIDES OF
CARBON & LEAD.
Conditions to Avoid Polymerization:DO NOT ADD DRIERS OR REACTIV CHEMS
W/O TECHNICAL SUPERVISION

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE W/LOC,STATE & FED
REGUL.INCINERAT IN EPA APPRVD FACIL.DO NOT INCINERAT CLOS
CONTAINER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.